Page 3 of 3

Re: A Slightly oops NPD: Line 6 M13

Posted: Mon Feb 21, 2022 12:09 pm
by Doog
Just a reminder


Re: A Slightly oops NPD: Line 6 M13

Posted: Mon Feb 21, 2022 12:15 pm
by Hurb
I watched that when it came out and felt like it was a personal attack.

Re: A Slightly oops NPD: Line 6 M13

Posted: Mon Feb 21, 2022 10:03 pm
by Doog
The second run-through of the riff makes it all okay though

Re: A Slightly oops NPD: Line 6 M13

Posted: Tue Feb 22, 2022 7:47 pm
by Mike
Unreal

Re: A Slightly oops NPD: Line 6 M13

Posted: Wed Mar 30, 2022 10:46 am
by Progrockabuse
So I’ve actually managed to play with this for a bit. I’ve been off work for the past month as I had a meltdown after a bad job and needed to get my head together.

The drive section is pretty good, tube driver especially. The modulation section has some really good stuff, I love the leslie sim and phase 90 sounds. Not 100% sold on its univibe sound but I will tweak it when I next get a chance. Yet to try it into my Marshall, but I’ve been using the clean sound on my little cube baby amp sim and it’s been sounding pretty sweet.

I think I will get an M9 as it’s just a little too big for what I need. I’m planning to use this in addition to my analog drive pedals. I’m desperate for a proper fuzz face again so I shall get one eventually and use it in conjunction with an M9 and my MBM box of Mike.

Re: A Slightly oops NPD: Line 6 M13

Posted: Wed Mar 30, 2022 11:04 am
by Bacchus
Sorry to hear you've been through it, glad to hear you're taking care of yourself, though (particularly using that time honoured and well proven method of healing through fuzz pedals....).

I find the drives very usable. I expected to hate them, but they're certainly good enough that if I need something between two other pedals on the M13, I don't feel iffy using one of them. Having so many EQ and compressors etc at hand is useful too.

Re: A Slightly oops NPD: Line 6 M13

Posted: Wed Mar 30, 2022 1:30 pm
by NickD
Bacchus wrote: Wed Mar 30, 2022 11:04 am Sorry to hear you've been through it, glad to hear you're taking care of yourself, though (particularly using that time honoured and well proven method of healing through fuzz pedals....).
Fuzzician heal thyself.

Rob, echoing what Paul says. We’re always here for support if you need us too.

Re: A Slightly oops NPD: Line 6 M13

Posted: Wed Mar 30, 2022 2:50 pm
by NickS
Progrockabuse wrote: Wed Mar 30, 2022 10:46 am So I’ve actually managed to play with this for a bit. I’ve been off work for the past month as I had a meltdown after a bad job and needed to get my head together.
I hope you're over the worst of it, Rob. It's a hell of a job you do (from what I see on the reality shows, and they can't show the worst of it).
I think I will get an M9 as it’s just a little too big for what I need. I’m planning to use this in addition to my analog drive pedals. I’m desperate for a proper fuzz face again so I shall get one eventually and use it in conjunction with an M9 and my MBM box of Mike.
The M13 does give you a display per DSP, though, as well as an extra DSP and an extra channel button per DSP over the M9 - and the FX loop. I still keep my eyes open for a reasonably priced M13 even though it's a big piece of kit. There's a cheap one in Telford with a dodgy push switch/encoder... but it's a long way to go to collect it.

Re: A Slightly oops NPD: Line 6 M13

Posted: Wed Mar 30, 2022 4:06 pm
by Thom
Sorry to hear you’ve been going through a tough time Rob.
Glad you’ve put it to good use and got some play time in :)
Look after yourself mate.

Re: A Slightly oops NPD: Line 6 M13

Posted: Wed Mar 30, 2022 4:35 pm
by Bacchus
NickS wrote: Wed Mar 30, 2022 2:50 pm
Progrockabuse wrote: Wed Mar 30, 2022 10:46 am So I’ve actually managed to play with this for a bit. I’ve been off work for the past month as I had a meltdown after a bad job and needed to get my head together.
I hope you're over the worst of it, Rob. It's a hell of a job you do (from what I see on the reality shows, and they can't show the worst of it).
I think I will get an M9 as it’s just a little too big for what I need. I’m planning to use this in addition to my analog drive pedals. I’m desperate for a proper fuzz face again so I shall get one eventually and use it in conjunction with an M9 and my MBM box of Mike.
The M13 does give you a display per DSP, though, as well as an extra DSP and an extra channel button per DSP over the M9 - and the FX loop. I still keep my eyes open for a reasonably priced M13 even though it's a big piece of kit. There's a cheap one in Telford with a dodgy push switch/encoder... but it's a long way to go to collect it.
Push switch as in one of the push knobs? Those are an easy fix.

Re: A Slightly oops NPD: Line 6 M13

Posted: Thu Mar 31, 2022 8:48 am
by NickS
Bacchus wrote: Wed Mar 30, 2022 4:35 pm Push switch as in one of the push knobs? Those are an easy fix.
Aye, but it's in Telford.

Re: A Slightly oops NPD: Line 6 M13

Posted: Fri Apr 01, 2022 8:57 am
by Doog
Progrockabuse wrote: Wed Mar 30, 2022 10:46 am So I’ve actually managed to play with this for a bit. I’ve been off work for the past month as I had a meltdown after a bad job and needed to get my head together.

The drive section is pretty good, tube driver especially.
So sorry to hear that, but glad you've been able to address this with some time off xo

And, yeah- the Tube Driver is good, eh! That was my base 'almost clean' tone for ages.

I do sing its praises a lot, but if you're playing on headphones, you might be better of with an HX Stomp rather than just an M9; I've had one for a few years and do 99% of my playing on it on headphones; sounds GREAT.

It has all the 'legacy' M-series effects on it, plus loads and LOADS of new models, including amp and/or cab sims, plus a million funky routing options so you can "dual rig" right there in The Matrix. Sick af.

Re: A Slightly oops NPD: Line 6 M13

Posted: Sun Apr 03, 2022 10:44 am
by Progrockabuse
Thanks for the kind responses, it’s a place I’d never thought I’d be in. Always been the strong one that nothing tends to phase, but after the past 3 years (miscarriages,fatherhood, wife’s health,covid,work) it had gotten to the point where I just snapped at home one day and experienced my first panic attack of my life. Therapy for the past 8 weeks has actually helped and having the time to rediscover me again has been valuable. Plus son cuddles make everything better :)

I’m not fully convinced by some of the fuzz sounds, but the unit tends to be quite dynamic for the player that uses volume on the guitar to vary crunch/clean/lead.

Nicks, how far is Derbyshire from yours? Might be up for an M9/M13 trade if I’m 100% sure it’s too big.

Re: A Slightly oops NPD: Line 6 M13

Posted: Sun Apr 03, 2022 10:45 am
by Progrockabuse
Doog wrote: Fri Apr 01, 2022 8:57 am
Progrockabuse wrote: Wed Mar 30, 2022 10:46 am So I’ve actually managed to play with this for a bit. I’ve been off work for the past month as I had a meltdown after a bad job and needed to get my head together.

The drive section is pretty good, tube driver especially.
So sorry to hear that, but glad you've been able to address this with some time off xo

And, yeah- the Tube Driver is good, eh! That was my base 'almost clean' tone for ages.

I do sing its praises a lot, but if you're playing on headphones, you might be better of with an HX Stomp rather than just an M9; I've had one for a few years and do 99% of my playing on it on headphones; sounds GREAT.

It has all the 'legacy' M-series effects on it, plus loads and LOADS of new models, including amp and/or cab sims, plus a million funky routing options so you can "dual rig" right there in The Matrix. Sick af.
HX series looks brilliant, just wish it was a little cheaper.

Re: A Slightly oops NPD: Line 6 M13

Posted: Mon Apr 04, 2022 9:23 am
by NickS
Progrockabuse wrote: Sun Apr 03, 2022 10:44 am Nicks, how far is Derbyshire from yours? Might be up for an M9/M13 trade if I’m 100% sure it’s too big.
We're near Basingstoke. My older son is in Long Eaton, so we're there a few times a year.