pictures of your gear here

Pickups, pedals, amps, cabs, combos

Moderated By: mods

User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Thanks Thom, I’ll check that video out. Bloody love univibes and that pedal show.

Todays rig is called “the idiot that sold his pedal power supply and can now only power one pedal at a time”

Stupidly of all the gear I had to sell to keep us afloat, I should have at least kept my trex fuel tank jr.

I do love this little MG10, clean channel can be a bit meh, but it takes pedals well and the gain channel has just the right amount of Marshall drive that I like.

Glad I managed to snag the M5 a while back for £30 as it’s all the one shot effects I like to have access to without having separate pedals for each sound. I don’t always use verb/delay but been messing around with the tape echo presets into the drive channel for some old school vibes.

Also glad I never sold my first proper guitar, she’s a keeper for life. Got it in 2008 and it’s aging better than me
Attachments
IMG_0707.jpeg
IMG_0707.jpeg (3.2 MiB) Viewed 1804 times
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Today’s tone tools, I love a good fuzz face.
Attachments
IMG_0738.jpeg
IMG_0738.jpeg (3.09 MiB) Viewed 1646 times
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Thom
lamp
Posts: 7064
Joined: Thu Apr 20, 2006 8:23 am
Location: Exeter, UK

Re: pictures of your gear here

Post by Thom »

Nice! Do love a guitar->fuzzface->amp setup.
User avatar
Doog
mid-century modem
Posts: 23345
Joined: Mon Apr 24, 2006 4:49 pm
Location: London

Re: pictures of your gear here

Post by Doog »

What's the bypass like on that drill set there?
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Doog wrote: Fri Nov 10, 2023 7:01 pm What's the bypass like on that drill set there?
That’s my son’s firefighting gear, because my tone was sooooo hot!! 😂😂

Though his favourite trick is switching my amp off and going “no! No!”
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Doog
mid-century modem
Posts: 23345
Joined: Mon Apr 24, 2006 4:49 pm
Location: London

Re: pictures of your gear here

Post by Doog »

Progrockabuse wrote: Fri Nov 10, 2023 7:05 pm
Doog wrote: Fri Nov 10, 2023 7:01 pm What's the bypass like on that drill set there?
That’s my son’s firefighting gear, because my tone was sooooo hot!! 😂😂

Though his favourite trick is switching my amp off and going “no! No!”

Classic firefighter banter
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Doog wrote: Fri Nov 10, 2023 7:06 pm
Progrockabuse wrote: Fri Nov 10, 2023 7:05 pm
Doog wrote: Fri Nov 10, 2023 7:01 pm What's the bypass like on that drill set there?
That’s my son’s firefighting gear, because my tone was sooooo hot!! 😂😂

Though his favourite trick is switching my amp off and going “no! No!”

Classic firefighter banter
The second truck on scene at an incident where we need fire support is their crew support vehicle, which provides tea and coffee 😂😂 They are affectionately nicknamed water fairies and are relived when they turn up.

Police are fucking annoying when they are on scene, trying to get statements from someone whilst your trying to actually bag them and do chest compressions
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Got one of the newer Octavio pedal on a cheeky loan from a friend. Wish it was the wedge style one as that was fucking savage when engaged.

I missed this and the fuzz face after the gear purge and wanted those sounds again.

Although I miss being in a band and jamming with others, I’m glad I can use whatever gear I want to not be forced to conform to the bands wishes for my sounds. My replacement seems to be being forced down that route by the band as he has a pretty much identical rig to what I was running back then. Very sad really.

Really want to use my Star Wars MBM but it could do with a service as the boost switch appears to not do anything anymore. Hopefully I can get it sorted and use it again fully.
Attachments
IMG_0741.jpeg
IMG_0741.jpeg (1.28 MiB) Viewed 1970 times
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Hello old friend, it’s been a very long time since you’ve been in action.
Attachments
IMG_0743.jpeg
IMG_0743.jpeg (3.21 MiB) Viewed 1937 times
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Thom
lamp
Posts: 7064
Joined: Thu Apr 20, 2006 8:23 am
Location: Exeter, UK

Re: pictures of your gear here

Post by Thom »

Yes!

How did you like the Octavio?
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Thom wrote: Sun Nov 12, 2023 7:40 pm Yes!

How did you like the Octavio?
It’s fucking nuts, in a good way. I had the original cheese wedge one a while back and very reluctantly sold it. I knew as soon as I sold it that the prices would go crazy and be unobtainable.

Same with the Hendrix fuzz face. I got the screamadelica one because it’s the guts out of the Hendrix one, but the primal scream one was a b stock and nearly £100 cheaper than the Hendrix one.

I watched a Tim Pierce video where he demonstrates the band of gypsys sound and he was using the octavio on that and it just reminded me how much i missed it. I tended to run it with the volume maxed into an overdrive and it just really shines.

Any recommendations for setting on the origin? Been a while since I ran it. I know to get it to distort it needs to be loud.

Keep toying with an sd-1 too
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Thom
lamp
Posts: 7064
Joined: Thu Apr 20, 2006 8:23 am
Location: Exeter, UK

Re: pictures of your gear here

Post by Thom »

Progrockabuse wrote: Sun Nov 12, 2023 9:25 pm
Thom wrote: Sun Nov 12, 2023 7:40 pm Yes!

How did you like the Octavio?
It’s fucking nuts, in a good way. I had the original cheese wedge one a while back and very reluctantly sold it. I knew as soon as I sold it that the prices would go crazy and be unobtainable.

Same with the Hendrix fuzz face. I got the screamadelica one because it’s the guts out of the Hendrix one, but the primal scream one was a b stock and nearly £100 cheaper than the Hendrix one.

I watched a Tim Pierce video where he demonstrates the band of gypsys sound and he was using the octavio on that and it just reminded me how much i missed it. I tended to run it with the volume maxed into an overdrive and it just really shines.

Any recommendations for setting on the origin? Been a while since I ran it. I know to get it to distort it needs to be loud.

Keep toying with an sd-1 too
Awesome, that sounds great!

This is how I usually run my Origin:
IMG_3747.jpeg
IMG_3747.jpeg (2.89 MiB) Viewed 1892 times
When I go to practice I just crank the Master but don’t really touch the rest. With the Tilt and Presence low I find it gives it more of a JTM/Bassman feel which I like. Even with the Master up full it’s still pretty clean and very loud! I just use pedals for gain. Have had an SD-1 on the board since the day I got it - works brilliantly.
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

That’s the vibe I’m after, I miss my JTM45 dearly and this was the closest compromise at the time. I’ll give those settings a spin.

I used to have an SD-1 years ago, think fran had it for while at some point. They appear locally quite cheap, so I’ll try and snag one at some point. Does it stack nice with pedals going into it?

Thanks for the settings :)
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Thom
lamp
Posts: 7064
Joined: Thu Apr 20, 2006 8:23 am
Location: Exeter, UK

Re: pictures of your gear here

Post by Thom »

No worries!
I always have the SD-1 first in terms or dirt so kick in other pedals after it, which works really well. But it’s great just on its own too.
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

Well, that was an eventful morning.

Plugged my Marshall in, go to power it on and off goes the power to all the sockets in the house. Unplug everything reset the RCD, plug just the extension lead in on it’s own, trips again. Try another extension lead with nothing else connected, trips again. Must be an issue with the sockets in that room.

Bring my Marshall downstairs and plug it in, all is good and no power tripping.

Used thom’s settings as a base, then tweaked a little to suit my strat. Decided to crank it, which sounded fucking glorious!!!! Though even on low power mode it’s still fucking loud.

Ran the fuzz face into the octavio then played around with some other things after it. The fuzz face does sound great through a clean amp, but it really comes into its own when running into a slightly distorted amp. Thinking of all those 60/70’s strat/fuzz/marshall tones, pretty much all of them were running into an overdriven amp.

So apart from getting the landlord to sort the power out in the office/bedroom/gear den, I’m looking at 3 possible avenues to go down.

1: get an attenuator to shave off some volume so I can use the origin cranked as a base sound. Think lazy bear make a 50 watt 16 ohm passive one for about £90 on evilbay

2: Run amp clean and get an overdrive pedal to use as my base always on sound to run behind the fuzz face.

3: fuck it and scare the cat/dog/child/wife/noise abatement with full tilt marshall rawk

Feels good to be able to play more regularly these days, I’ve needed it more than I thought, especially mentally.
Attachments
IMG_0747.jpeg
IMG_0747.jpeg (3.41 MiB) Viewed 1870 times
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
Thom
lamp
Posts: 7064
Joined: Thu Apr 20, 2006 8:23 am
Location: Exeter, UK

Re: pictures of your gear here

Post by Thom »

That sounds like a lot of fun!
My vote would be 2 for when the family are home and 3 when you have the place to yourself! :D
User avatar
NickD
.
.
Posts: 6305
Joined: Thu Apr 20, 2006 7:41 am
Location: Sheffield, Innit

Re: pictures of your gear here

Post by NickD »

It will still be loud even with an attenuator, but my 18 watt is at least usable at home with it. Have you still got your old attenuator? You could get it fixed. It's worth getting one with treble boost on it, they suck a fair amount of treble out of the sound otherwise.
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

NickD wrote: Tue Nov 14, 2023 7:43 am It will still be loud even with an attenuator, but my 18 watt is at least usable at home with it. Have you still got your old attenuator? You could get it fixed. It's worth getting one with treble boost on it, they suck a fair amount of treble out of the sound otherwise.
It just one switch I need to replace and then it should be good to go. I’ve ordered the switch, I’m just shit at soldering.
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST
User avatar
NickD
.
.
Posts: 6305
Joined: Thu Apr 20, 2006 7:41 am
Location: Sheffield, Innit

Re: pictures of your gear here

Post by NickD »

Progrockabuse wrote: Tue Nov 14, 2023 9:41 am
NickD wrote: Tue Nov 14, 2023 7:43 am It will still be loud even with an attenuator, but my 18 watt is at least usable at home with it. Have you still got your old attenuator? You could get it fixed. It's worth getting one with treble boost on it, they suck a fair amount of treble out of the sound otherwise.
It just one switch I need to replace and then it should be good to go. I’ve ordered the switch, I’m just shit at soldering.
If it's not PCB mounted then bring it over and I'll solder it if you like. Otherwise a TV repair man or similar will be able to do it for little money.
User avatar
Progrockabuse
.
.
Posts: 4969
Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire

Re: pictures of your gear here

Post by Progrockabuse »

NickD wrote: Tue Nov 14, 2023 10:37 am
Progrockabuse wrote: Tue Nov 14, 2023 9:41 am
NickD wrote: Tue Nov 14, 2023 7:43 am It will still be loud even with an attenuator, but my 18 watt is at least usable at home with it. Have you still got your old attenuator? You could get it fixed. It's worth getting one with treble boost on it, they suck a fair amount of treble out of the sound otherwise.
It just one switch I need to replace and then it should be good to go. I’ve ordered the switch, I’m just shit at soldering.
If it's not PCB mounted then bring it over and I'll solder it if you like. Otherwise a TV repair man or similar will be able to do it for little money.
Literally as pictured, be a shame to ditch it as the mini mass is a great unit. I stupidly left it loose in the back of my open back Marshall cab I had at the time. When I came to use it it was broken, so must of gotten bashed in transit.
Attachments
IMG_20190522_111802_Original.jpeg
IMG_20190522_111802_Original.jpeg (636.55 KiB) Viewed 1793 times
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr

Pedals: Ceriatone Centura>Danelectro PB&J Delay

Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo

PROGFEST