I like this one the best but I worry that the switch might be in the way.cur wrote:![]()
teisco inspired mustang build
Moderated By: mods
I am liking the lever switch more and more. I think you guys are right and it will work. I like the all black or black metal knobs the best, the all aluminum ones are nice, but a bit on the large size. have to wait and see what looks best once painted I guess.
I used the black and metal ones on this build and it looks good.
![Image](http://bestnetworx.com/uploader/files/386/HHintermarkbuild1.jpg)
I used the black and metal ones on this build and it looks good.
![Image](http://bestnetworx.com/uploader/files/386/HHintermarkbuild1.jpg)
Finally it has warmed up enough to shoot paint again. Crazy cold spring or else pouring rain. Got a great deal on a 8 gallon 125 psi compressor at HF. Really like it and it is pretty darn quiet for a compressor. Modified it by getting rid of the out port pressure regulator and added a water trap/filter/pressure regulator. I had to add a 4 inch extension so it would fit. Then I am using a 25' 3/8th hose (should cool the air nicely before hitting the gun). And on eacy of my guns I have a pressure regulator and a final filter/water trap.
The purple gun is a 4 oz touch up gun from HF and once I teflon taped some of it's threaded connections, works great. Since it is a smaller gun, I have found you need to get pretty close (5 inches) and lay down a nice wet coat and do a 50% overlap. I purchased a qt. of duplicolor clear gloss and filter it going into the reservoir. This is sooo much better than using rattle can stuff that takes longer than a month to dry. I have had so much problems with spray can gloss I will never do it again.
![Image](http://bestnetworx.com/uploader/files/386/paint%20rig.jpg)
![Image](http://bestnetworx.com/uploader/files/386/gloss%20pink.jpg)
The purple gun is a 4 oz touch up gun from HF and once I teflon taped some of it's threaded connections, works great. Since it is a smaller gun, I have found you need to get pretty close (5 inches) and lay down a nice wet coat and do a 50% overlap. I purchased a qt. of duplicolor clear gloss and filter it going into the reservoir. This is sooo much better than using rattle can stuff that takes longer than a month to dry. I have had so much problems with spray can gloss I will never do it again.
![Image](http://bestnetworx.com/uploader/files/386/paint%20rig.jpg)
![Image](http://bestnetworx.com/uploader/files/386/gloss%20pink.jpg)
Actually, I just need to drill two holes in it and it will be done. It's been sitting around almost done for a long time. I went through a series of tennis elbow issues and then a pinched nerve in my neck that has kept me from playing and, in turn, demotivated me from working on guitars. A friend of mine asked me to set up his kids guitar got me motivated to build and finish my builds again. I even picked up an old teisco with gold foils foe cheap from my local shop that knows I am into old Japanese pickups. My back and elbows keep me from playing, but I'm back at messing about with builds again. So soon I think I will have it done.