ShortScale Forum Index www.shortscale.org
Head 'n Neck Above
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
UploaderUploader   ShortScale WikiBuilder

Stanger Lee

 
Post new topic   Reply to topic    ShortScale Forum Index -> Musical Miscellany
View previous topic :: View next topic  
Author Message
DGNR8
.
.


Joined: 30 Sep 2006
Posts: 4209
Location: DC Area

PostPosted: Sun Feb 18, 2007 8:17 pm    Post subject: Stanger Lee Reply with quote

I just examined my loaded Mustang guard and the new JS guard which is similar on the one pup. I also looked at the Wiki and the schematic, which looks pretty simple, even for me.

Based on what I saw, it looks like my loaded guard is correct, but the white and black coming off of it are flipped. No biggie.

The curious thing is that he used a cloth wire in only one spot and plastic everywhere else, and there's an opaque black goo on parts of it, like electrical tape sticky but in globs. Is it best to use same with same wires? I know Aug would rip out dudes' wires and do it over in cloth. I have both kinds in white and black I could use.

On the JS, where does the black wire originate at the switches going to the jack? The JS guard has the end of a white, but no black. I will look for a schematic for that too. I found one on Jiz-stain.com but it's drawn in that techy style that I don't gets.

Also, what kind of screws do you use to attach the JS trem to the guitar? Might it be these, or something else? According to this JS.com pic, it looks like three round heads and two flats. May be a length thing? The freaking Fender parts I got from Guitarpartsresource didn't come wif screws.

SCREWED






_________________
Yell Like Hell


Last edited by DGNR8 on Sun Feb 18, 2007 8:41 pm; edited 1 time in total
Back to top
View user's profile Send private message
Aug
Best Poster 2010


Joined: 17 Apr 2006
Posts: 1335

PostPosted: Sun Feb 18, 2007 8:21 pm    Post subject: Reply with quote

As for the wiring, I am aware that the js is wired somewhat different from the Mustang, but have a look at this:

http://www.shortscale.org/wiki/index.php/Wiring_A_Fender_Mustang

Also, the tremolo plate screws are identical to pg screws in everyway except length. Either 3/4" or 1"
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    ShortScale Forum Index -> Musical Miscellany All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2001, 2002 phpBB Group

Anti Bot Question MOD - phpBB MOD against Spam Bots
Blocked registrations / posts: 621996 / 0

Guitars at Musician's Friend

Help support this site by clicking the above link!